ARP 2600 Semi-modular synthesizer module

Synthesis Type: Analog

LFO: 3

Filters: Low Pass

Inputs: USB, Sustain pedal, Midi, Audio in, CV in, Gate in, Trig in, USB Midi

Outputs: Midi, Headphones, Audio, USB / Midi, Analogue, CV out, Gate out

Software provided: Korg bundle

Envelope: ADSR, Attack - Release

Accessories included: Patch cables, Mains power supply, Semi-rigid case

Sound generator: VCO

Dimensions (mm): 520 × 129 × 311 mm

Weight (kg): 5.90 kg

Sequencer: No

Of effects: 1

Max polyphony: 2

Additional specs: Temperature accepted in use: 0 - +40 ° C (non-condensing)

Maximum polyphony: 2 notes duophonic, normally monophonic.

VCO-1 (Voltage Controlled Oscilator 1)

Waveforms: sawtooth, square

Approx. 0.03 Hz - 30 Hz (low frequency mode)

Approx. 10 Hz - 10 kHz (audio mode)

Control voltage: 1 V / oct.

VCO-2 (Voltage Controlled Oscilator 2)

Waveforms: sawtooth, pulse (dynamic), triangle, sinusoidal

Approx. 0.03 Hz - 30 Hz (low frequency mode)

Approx. 10 Hz - 10 kHz (audio mode)

Pulse width: 10% - 90%

Control voltage: 1 V / oct.

VCO-3 (Voltage Controlled Oscilator 3)

Waveforms: sawtooth, pulse (dynamic)

Approx. 0.03 Hz - 30 Hz (low frequency mode)

Approx. 10 Hz - 10 kHz (audio mode)

Pulse width: 10% - 90%

Control voltage: 1 V / oct.

VCF (Voltage Controlled Filter)

Type: low pass (TYPE I: prime 24 dB / oct.,

TYPE II: second 24 dB / oct.)

Frequency Range: Approx. 10 Hz - 10 kHz

Resonance: 1/2 - auto oscillation

VCA (Voltage Controlled Amplifier)

AR type (internally connected)

ADSR type (internally connected)

Noise generator: Spectral noise (White and Pink)

RING MODULATOR

Type: analog multiplier

Input signal (connected internally): VCO-1 sawtooth, VCO-2 sinusoidal

SAMPLE & HOLD

Sampled signal: Noise (connected internally)

Front panel (left - right output jacks)

Connectors: φ3.5 mm monaural jack

Maximum output level: +9 dBu @ 10 kΩ load

Output impedance: 1.2 kΩ

Connector: XLR

Maximum output level: +4 dBu @ 600Ω load

Output impedance: 1.2 kΩ

Connector: φ6.3 mm stereo jack

Maximum output level: 50mW + 50mW @ 33Ω load

Output Impedance: 20Ω

External audio input (Preamplifier input) JACK

Connector: φ3.5 mm Jack mono

Maximum input level: −10 dBu

Input impedance: 100 kΩ

MIDI connector: IN, OUT, THRU

USB Port: Type B

ARP 3620 (keyboard)

Keyboard: 49-notes (with aftertouch, no velocity)

Higher voice −3 V - +10 V, 1 V / oct.

Lower voice −3 V - +7 V, 1 V / oct.

Triangle ± 5 V, 10 Vp-p

Square +10 V, 10 Vp-p

Sinusoidal ± 3 V, 6 Vp-p

External vibrato: input voltage: Max. ± 10 V

VIBRATO DEPTH slider: Max. 1 octave

VIBRATO DELAY slider: 0 - 2.5 sec

LFO SPEED slider: Approx. 0.25 - 25 Hz

PITCH BEND control: ± 1 octave

Switch transposition: ± 2 octave